Skip to main content Skip to search Skip to main navigation
Expertise. Performance. Reliability.
+49 6403 97274 00 Mon–Fri · 8am to 5pm

Product information "Lacagri 3-in-1 paint – Colour: Ivory (Wheel rims) for SAME – 1 l"

Lacagri 3-in-1 paint – Colour: Ivory (Wheel rims) for SAME – 1 l

Primer, rust protection and topcoat in one: Lacagri 3-in-1 paint in the shade Ivory (Wheel rims) for SAME combines colour refurbishment with corrosion protection. The 1 l pack is suitable for maintaining agricultural machinery, equipment and suitable metal components indoors and outdoors.

Colour and application

This version belongs to the colour range for SAME. Compare the colour code, version and, where relevant, year with the existing coating. Screen colours, ageing and previous repainting can affect the apparent shade; a test patch helps you check the match. The vehicle brand indicates the colour application; Lacagri is the paint manufacturer.

Benefits of the 3-in-1 system

  • Primer: The primer function is built into the paint system, simplifying the coating process on suitable, prepared ferrous metals.
  • Rust protection: The continuous paint film protects the prepared metal substrate against corrosion and helps preserve the machine’s condition.
  • Topcoat: The coloured finishing coat gives repairs and repainted areas a uniform appearance.

High opacity makes it easier to achieve an even finish. Fast drying helps keep maintenance and repair work moving. Thorough preparation and a coating system suited to the material remain essential for a lasting finish.

Choose the right pack size

The 1-litre tin is a practical size for repairs, individual components and smaller painting jobs. Dispense the amount needed for the work. Depending on the task, apply with a brush, roller or suitable spray gun.

Surface preparation and application

The surface must be dry, clean, sound and free from grease. Remove loose coatings, rust and mill scale, and check existing paint for compatibility. The 3-in-1 system does not replace this preparation. Non-ferrous metals require a suitable adhesion primer after degreasing. Always follow the application instructions on the pack.

Stir the paint thoroughly before use. Apply directly by brush or roller; for spray-gun application, adjust the viscosity with a suitable system thinner as specified in the technical instructions. Avoid excessively thick coats and allow sufficient drying time before assembling components or putting them under load.

Drying and material planning

For GA 208 paint in tins, the technical data sheet gives the following approximate times at 20 °C, 60 % relative humidity and a dry film thickness of 30 µm: dust-dry after 15 minutes, ready to handle after 40 minutes and through-dry after 24 hours. Maximum hardness is reached after about 10 to 15 days; the stated recoating interval is 48 hours. The quoted 6 to 10 m² is per kilogram of diluted paint, not a general coverage figure per litre. Colour, application method and substrate affect the amount required.

Product data
ManufacturerLacagri
ColourIvory (Wheel rims)
Contents [l]1
Pack typeTin
Article numberBAS200242
Supplier article number1676665
Machinery brand / colour matchSAME

Safety, storage and disposal

Warning. H226: Flammable liquid and vapour. H315: Causes skin irritation. H319: Causes serious eye irritation. H332: Harmful if inhaled. H335: May cause respiratory irritation. H373: May cause damage to organs through prolonged or repeated exposure.

Work only with adequate ventilation. Do not breathe vapour or spray mist; wear suitable protective gloves and eye and skin protection. For spraying, follow the respiratory-protection instructions in the safety data sheet. Keep away from heat, sparks and naked flames; do not smoke. Store out of reach of children. Do not allow residues to enter drains or watercourses. Take the contents and container to an authorised waste facility as directed in the safety data sheet.

Downloads

Download the safety data sheet for Lacagri paint in tins (German, PDF)

Manufacturer information

Lacagri

Lacagri paints for agricultural machinery, tractors and metal components: 3-in-1 paints in a choice of colours, in tins and aerosol cans.

Technical properties · Lacagri 3-in-1 paint – Colour: Ivory (Wheel rims) for SAME – 1 l

Properties
Color beige
Compatible brands SAME
Properties
Volume [L] 1
packaging can

0 of 0 reviews

Average rating of 0 out of 5 stars

Leave a review!

Share your experiences with other customers.