LEHNER Vento Pro 120 pneumatic hose spreader
€8,115.00 *
Available, delivery time: 1-3 days
Product information LEHNER Vento Pro 120 pneumatic hose spreader
LEHNER VENTO® Pro – precise application across large working widths
The LEHNER VENTO® Pro is a pneumatic hose spreader for large-scale application of cover crops, slug pellets and granulated fertilisers. The system is designed for free mounting on existing sprayer booms and is particularly suitable for farms that want to use wide booms efficiently while maintaining clean metering.
Your benefits in use
- Working widths of up to 42 m possible
- 4 to 8 individually controllable spreading discs depending on configuration
- Two 12-volt high-performance blowers for reliable conveying of the spreading material
- Speed-dependent metering as standard
- Headland manager via 7-pin signal socket
- Individual configuration matched to carrier vehicle and application
How the VENTO® Pro works
The spreading material is conveyed by two high-performance blowers through hose and pipe connections to the spreading discs. This allows the material to be distributed widely and in a controlled manner. Metering is dependent on driving speed, which ensures an even spreading pattern, especially under changing driving conditions.
Who is the VENTO® Pro suitable for?
The VENTO® Pro is the right solution for professional users who want to use existing field sprayer booms for the precise application of additional materials. Especially on large areas, the system offers a clear practical advantage because high working widths are combined with targeted and adjustable distribution.
Equipment overview
- 8 hose outlets for connecting 4 to 8 spreading disc units
- Metal hopper with 120 l or 230 l capacity
- 360 l and 550 l possible on request
- Control unit for operating the most important functions
- Maximum spreading width per spreading disc up to 12 m
- JKI-tested according to RiLi 3-1.0 including test seal and test report
Important note on selection
The VENTO® Pro is not a rigid standard system. The complete configuration is individually matched to the machine and application. This is exactly where the major advantage lies: you receive a solution that fits your working width, your boom and your field of application. Before purchasing, the carrier vehicle, desired number of spreading discs, hopper size and spreading material should therefore be considered carefully.
Conclusion
If you are looking for a professional system for large working widths and want to use existing sprayer booms efficiently, the LEHNER VENTO® Pro is a well-designed solution. It combines flexible mounting, precise metering and application-specific configuration in a spreading system designed for performance and practical use.
Suitable accessories
Spreading disc with connection cable (20 m) – distribution for VENTO ProThe spreading disc (item no. 77562) is used with the VENTO Pro and ensures distribution of the spreading material across the surface.Application in practiceDepending on the working width, multiple spreading discs are used for even distribution.FeaturesIncludes 20 m connection cableFor variable spreading widthsExpandable as required
Battery cable 6 m (6 mm²) – power supply for Lehner spreadersThe battery cable (item no. 81738) is used to connect Lehner spreaders directly to the vehicle battery. It is particularly suitable when the spreader is operated on multiple vehicles or when no fixed power supply is available.Application in practiceIdeal when switching between machines or as a spare cable for additional vehicles.Technical dataLength: 6 mCross-section: 6 mm²12-volt system
Battery cable 3.5 m with ISOBUS – power via tractor socketThe battery cable (item no. 73353) supplies power to the spreader via the ISOBUS socket. A direct connection to the battery is not required.Application in practiceFor tractors with ISOBUS connection and changing machines.FeaturesLength: 3.5 mISOBUS plugNo separate battery cable required
Blanking plug for hose outlets – shut off individual linesThe blanking plug (item no. 82626) is used to seal individual hose outlets on Lehner spreaders.Application in practiceWhen not all outlets are required or working widths are to be reduced.FunctionSealing individual outletsAdjustment of spreading widthEasy to install
GPS receiver AccoSat – speed signal without tractor connectionThe GPS receiver AccoSat (item no. 81603) provides a speed signal for Lehner spreaders when no signal is available from the tractor. This ensures a constant application rate even at changing speeds.Application in practiceFor older tractors or machines without a speed signal at the socket.FunctionSpeed detection via GPSSignal transmission to spreaderConstant dosing
Wheel sensor – detect speed directly at the wheelThe wheel sensor (item no. 73201) measures the driving speed via wheel movement and transmits the signal to the spreader.Application in practiceAlternative to speed signal from tractor or GPS.FunctionDetection of wheel movementConversion into speedSignal transmission
Transport and mounting bracket – mounting for Lehner spreadersThe transport and mounting bracket (item no. 73447) is used for secure mounting and safe storage of the spreader.Application in practiceFor transport, storage or defined mounting points on the vehicle.FeaturesRobust constructionFor mounting and transportCompatible with Lehner systems
Headland manager with hydraulic sensor – automatic spreader controlThe headland manager (item no. 72141) controls the spreader via the tractor’s hydraulic movement. When lifting, spreading stops; when lowering, it starts again.Application in practicePrevents overlap at the headland and reduces manual switching.FunctionDetection of lifting movementAutomatic controlClean field transitions
Headland manager with spring switch – automatic control when turningThe headland manager (item no. 73422) controls the spreader via a mechanical spring switch. When lifting or lowering, spreading is automatically stopped or started.Application in practiceSuitable for machines without hydraulic signal or when a mechanical solution is preferred.FunctionActivation via spring switchAutomatic opening and closingReduces overlap at the headland
Y distributor cable 7-pin – two devices on one socketThe Y distributor cable (item no. 73489) splits a 7-pin signal into two connections. This allows multiple components to be operated simultaneously.Application in practiceFor parallel operation of GPS receiver and headland manager.Technical data1x 7-pin plug2x 7-pin socket
Cell wheel shaft FLEX 2x 13.0 ml – achieve higher application ratesThe cell wheel shaft FLEX (item no. 73365) with 2x 13.0 ml per outlet is used when higher application rates are required.Application in practiceFor coarse or bulky spreading materials and higher dosing rates.Features2x 13.0 ml per outletIncreased conveying capacityCompatible with Lehner VENTO systems
25 m Superflex hose roll – routing system for VENTO ProThe hose roll (item no. 77570) is used for routing hoses in the VENTO Pro system.Application in practiceFor individual hose routing along booms or machinery.Features25 m hoseFlexible routingCompatible with VENTO Pro