Streutechnik Zubehör

Spreading disc with connection cable (20 m) – distribution for VENTO ProThe spreading disc (item no. 77562) is used with the VENTO Pro and ensures distribution of the spreading material across the surface.Application in practiceDepending on the working width, multiple spreading discs are used for even distribution.FeaturesIncludes 20 m connection cableFor variable spreading widthsExpandable as required

25 m Superflex AirDos hose set with deflector plate – complete distribution setThe hose set (item no. 73540) includes 25 m Superflex hose, deflector plates and mounting material for spreading with the AirDos spreader.Application in practiceFor distributing spreading material across multiple outlets or extending existing systems.Components25 m hoseDeflector platesMounting hardware

25 m Superflex hose roll – routing system for VENTO ProThe hose roll (item no. 77570) is used for routing hoses in the VENTO Pro system.Application in practiceFor individual hose routing along booms or machinery.Features25 m hoseFlexible routingCompatible with VENTO Pro

25 m Superflex hose set with deflector plate – distribution system for spreadersThe hose set (item no. 73423) consists of 25 m Superflex hose including deflector plate and mounting brackets for distributing the spreading material.Application in practiceFor distributing material across multiple outlets and larger working widths.Components25 m hoseDeflector plateMounting brackets

Abrasion protection sleeve 35 mm – protection for lashing strapsThe abrasion protection sleeve (Art. No. 81354) is pulled over lashing straps and protects them from wear caused by friction.Application in practiceWhen securing spreaders or accessories in order to avoid damage to the strap.FeaturesDiameter: 35 mmProtection against abrasionEasy to slide on

Additional pressure-relief roof for grit and sand – even material flowThe additional pressure-relief roof (Art. No. 82244) is used to reduce the pressure of grit and sand in the hopper.Application in practiceFor heavy materials that tend to compact and impair the material flow.FeaturesFor grit and sandImproves material flowFor hopper sizes 110–250 l

Adjustable pick-up mounting bracket – flexible mounting on vehiclesThe adjustable pick-up mounting bracket (item no. 77508) allows adaptation to different vehicle widths and mounting positions.Application in practiceUsed with different vehicles or when the spreader position needs adjustment.FeaturesAdjustable widthSuitable for different vehiclesRobust design

ATV/Quad mounting bracket “on carrier” – mounting for smaller vehiclesThe ATV/Quad mounting bracket (item no. 72109) allows Lehner spreaders to be mounted on a carrier on an ATV or quad.Application in practiceFor use of spreaders on smaller vehicles in grassland or specialty crops.FeaturesMounting on carrierSuitable for ATV and quadStable attachment

ATV/Quad rear mounting bracket – mounting at the rear of the vehicleThe ATV/Quad mounting bracket (Art. No. 72107) enables a Lehner spreader to be attached to the rear of an ATV or quad.Application in practiceFor applications where the spreader is to be carried behind the vehicle, e.g. on grassland or during maintenance work.FeaturesRear mountingSuitable for ATV and quadStable fastening

AUTO-DOSIS for 7-pin signal socket – speed-dependent dosingThe AUTO-DOSIS (item no. 72167) automatically regulates the application rate based on the speed signal via the 7-pin socket.Application in practiceUsed when the application rate needs to be adjusted depending on the driving speed.FunctionConnection to 7-pin signal socketAutomatic adjustment of dosingConsistent application rate

AUTO-DOSIS with GPS receiver – dosing without tractor signalThe AUTO-DOSIS (item no. 72168) including GPS receiver enables speed-dependent dosing without a signal from the tractor.Application in practiceFor machines without a speed signal or with inaccurate signal transmission.FunctionSpeed detection via GPSAutomatic adjustment of application rateIndependent of tractor signal

Battery cable 3 m (4.0 mm²) – power supply for spreadersThe battery cable (Art. No. 81331) is used to supply power to Lehner spreaders via the vehicle battery.Application in practiceFor compact installations with a short distance between the battery and the spreader.FeaturesLength: 3 mCable cross-section: 4.0 mm²For 12-volt systems

Battery cable 3.5 m with ISOBUS – power via tractor socketThe battery cable (item no. 73353) supplies power to the spreader via the ISOBUS socket. A direct connection to the battery is not required.Application in practiceFor tractors with ISOBUS connection and changing machines.FeaturesLength: 3.5 mISOBUS plugNo separate battery cable required

Battery cable 6 m (4.0 mm²) – power supply for spreadersThe battery cable (Art. No. 81332) is used to supply power to Lehner spreaders via the vehicle battery.Application in practiceFor greater distances between the battery and the spreader.FeaturesLength: 6 mCable cross-section: 4.0 mm²For 12-volt systems

Battery cable 6 m (6 mm²) – power supply for Lehner spreadersThe battery cable (item no. 81738) is used to connect Lehner spreaders directly to the vehicle battery. It is particularly suitable when the spreader is operated on multiple vehicles or when no fixed power supply is available.Application in practiceIdeal when switching between machines or as a spare cable for additional vehicles.Technical dataLength: 6 mCross-section: 6 mm²12-volt system

Battery cable incl. mounting bracket, 5 m – power supply for Lehner spreadersThe battery cable including mounting bracket (item no. 72154) is used to supply power to various Lehner spreaders directly via the vehicle battery. The bracket ensures clean and secure mounting on the vehicle or machine.Application in practiceUsed when connecting a spreader to another vehicle or replacing an existing cable.FeaturesCable length: 5 mWith mounting bracketFor 12-volt power supply

Blanking plug for hose outlets – shut off individual linesThe blanking plug (item no. 82626) is used to seal individual hose outlets on Lehner spreaders.Application in practiceWhen not all outlets are required or working widths are to be reduced.FunctionSealing individual outletsAdjustment of spreading widthEasy to install

Blanking plug for outlets – close individual linesThe blanking plug (item no. 83175) is used to close individual outlets on the AirDos spreader.Application in practiceUsed when not all outlets are required or when the spreading width is to be reduced.FeaturesFor closing individual outletsEasy installationCompatible with AirDos systems

White calibration bag with PE inner bag – collect spreading material for calibration testThe calibration bag (item no. 82060) is used to cleanly collect spreading material during the calibration test. The integrated PE inner bag makes it easier to remove and subsequently weigh the material.Application in practiceHelpful when setting up the spreader to check the applied quantity before use.FeaturesWith PE inner bagFor clean material collectionSuitable for calibration tests

M12 connection cable 10 m – extended control connectionThe connection cable (Art. No. 81426) is used to connect the control unit and power unit over greater distances.Application in practiceFor machines with a larger design or extended systems.FeaturesLength: 10 mM12 plug connectionSuitable for greater distances

M12 connection cable 2 m – short control connectionThe connection cable (Art. No. 81424) connects the control unit and power unit over short distances.Application in practiceWhen components are mounted close to each other.FeaturesLength: 2 mM12 plug connectionFor control and power units

M12 connection cable 5 m – control cable for power unitThe connection cable (Art. No. 81425) connects the control unit and power unit within the spreader system.Application in practiceRequired when components are mounted further apart.FeaturesLength: 5 mM12 plug connectionFor control and power units

Control cable connector – retrofit for flexible connectionThe connector (item no. 73313) allows the control cable between the spreader and control unit to be disconnected.Application in practiceFacilitates coupling and uncoupling of the spreader as well as transport.FeaturesPlug and socketRetrofit possibleImproves handling

Cultivator mounting bracket for implement triangle – mounting on implementThe cultivator mounting bracket for implement triangle (item no. 72103) allows Lehner spreaders to be mounted on a cultivator in combination with an implement triangle.Application in practiceUsed when the spreader is to be carried directly on the tillage implement and an implement triangle is already available.FeaturesCombination of cultivator and implement triangle mountFor fixed mounting on implementCompatible with multiple Lehner series